I. Safe Operation

1. To ensure that the yacht is in a safe operating state, check the hull, engine, communication equipment and other 2. equipment frequently.

3. When refueling the yacht, make sure you understand the fuel tank capacity and the fuel consumption of the line at normal speed (engine speed).

5. Make sure that the yacht has enough fuel for sailing.

6. Make sure fire extinguishers and life-saving appliances are available on the yacht.

7. Pay attention to the weather conditions. Keep an eye on the weather and check your local weather report before you leave.

8. Carry accurate and up-to-date charts in the navigational area.

9. Do not use the springboard or boarding ladder when the engine is still running.

10. Do not overload or improperly load.

11. Do not exceed the speed or speed limit.

12. Do not drive a yacht under conditions of weather or sea conditions that exceed your experience and ability.

13. Don't drive the yacht after drinking.

14. Do not drive the yacht in poor visibility.

First aid in distress

时 In distress

1. You can call China's unified maritime distress call for help "12395".

2. In the last resort, you can send a distress signal by using a mirror or throwing dye into the sea.

3. Engine failure

Encounter engine overheating

2. Find a safe place to anchor and stop the ship;

3. Set the shift level to neutral and turn off the engine;

4. Check the engine to see if there is any steam leakage;

5. If there is no leakage of coolant or steam, check all sluices and cooling pipes;

6. If the engine is equipped with a fresh water cooling device, check the cooling oil level. If the level is low, continue 7. Check the rubber hoses and connections to see if a leak can be found.

Fourth, the battery failure

In case of battery electrolyte leakage

1. Ventilate the leakage area;

2. Pour sodium bicarbonate on the leak to neutralize the acid in the electrolyte;

3. Wipe off the neutralized electrolyte with a disposable rag or paper towel.

Five, circuit system failure

Encountered circuit system stopped working

1. First check the relevant fuses or circuit breakers on the main switchboard to turn off the ignition and all other 2. switches, including circuit breakers;

3. Check any blown fuse and replace it as soon as you find it;

4. Avoid using this circuit if the same fuse blows again or the circuit breaker closes.